Search
Search
Confirm
Cancel
HENGLI PRODUCTS
>
>
>
HLG850 Graphite gasket
Number of views:
1000

HLG850 Graphite gasket

The 850 series is punched out of pure graphite board or graphite composite reinforced board. Excellent corrosion resistance, high and low temperature resistance; good compression resilience, good strength. It is a sealing element for pipes, valves, pumps, pressure vessels, heat exchangers, condensers, etc. It can also be cut into gaskets with complex shapes, such as gaskets for water level gauges and gaskets with bolt holes.
The 850E series is an improvement of the 850 series. The inner and outer rings are covered with metal foil. Maintain the original excellent performance, and can effectively prevent the penetration of the medium.
Common thickness 1.5mm, 2.0mm, 3.0mm, 4.5mm.
Retail price
0.0
Yuan
Market price
0.0
Yuan
Number of views:
1000
Product serial number
A-011
Category:
Gasket Series
Quantity
-
+
Stock:
0

For more information, please Email or call our hotline.

Detail
Parameters
Application Flanges, valve covers, heat exchangers, liquid level indicators, etc.
Typical working fluid High temperature and high pressure steam, hot water, gas, heat medium, hydrocarbon, organic solvent, acid, alkali (PH0-14), LPG, LNG, liquefied oxygen, nitrogen, hydrogen, etc.

 

 

•Type

No.

Name

Construction

Pressure (Mpa )

Temperature(°C)

In Oxidizing Media

In Non

Oxidizing Media

HLG850

Pure graphite gasket

2.5

-240-400

-240-1650

HLG851

Reinforced graphite gasket with punched metal

6.3

-240-450

-10-450

(C.S.)

-240-560 (SS304)

-240-870

(SS316)

HLG852

Reinforced graphite gasket with adhesive metal

6.3

-240-450

-200-560 (SS304)

-200-870

(SS316)

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

Related Products

HLG124 Asbestos metal spiral wound gasket
HLG124 Asbestos metal spiral wound gasket
This type of gasket uses asbestos as a filler and has a wide range of uses, such as pipeline flanges, pressure vessels, heat exchangers and various valve covers.
The maximum working pressure can reach 42.0MPa.
The maximum operating temperature can reach 600°C.
Detail + 白箭头 黑箭头
HLG216 Non-asbestos metal spiral wound gasket
HLG216 Non-asbestos metal spiral wound gasket
Due to the use of non-asbestos as the filler, in addition to heat resistance, other properties are the same as asbestos gaskets, and the design and use conditions are the same as asbestos. It is a static sealing element for flange connections such as pipes, heat exchangers, and towers. Used in petroleum, chemical, electric power, shipbuilding, steel and other sectors.
Detail + 白箭头 黑箭头
HLG436 PTFE spiral wound gasket
HLG436 PTFE spiral wound gasket
PTFE has strong corrosion resistance. For example, it can be used in corrosive vacuum piping if it is combined with strong corrosion resistance metals such as Monel, titanium, and nickel. It is a static sealing element at the flange joints of pipelines, heat exchangers, towers, etc., and is widely used in petroleum, chemical, electric power, shipbuilding, steel and other sectors. It is especially suitable for corrosion resistance and sealing of vacuum parts.
Detail + 白箭头 黑箭头
HLG336 Graphite metal spiral wound gasket
HLG336 Graphite metal spiral wound gasket
Expanded graphite has the advantages of high temperature resistance, corrosion resistance, flexibility and good resilience. In the spiral wound gasket series, its service temperature is relatively high. It is most suitable for use in occasions where the temperature changes. It is a static sealing element at the flange connection of pipelines, heat exchangers, tower tanks, etc., and is widely used in petroleum, chemical, electric power, shipbuilding, steel and other sectors. It is especially suitable for high temperature and high pressure steam, LPG, and alternating hot and cold temperature differences.
Maximum operating temperature: oxidizing gas: 450°C; non-oxidizing gas: 800°C.
Detail + 白箭头 黑箭头

Got Question? Call Us 24/7!

ADD:No. 1655 Chaosheng Road, Cixi Industrial Zone , Cixi City, Zhejiang,China 315318
TEL:+86-574-63013766
FAX:+86-574-6301325563034116
E-mail:hengli@china-sealing.com

Hengli

Copyright © 2020 Cixi Hengli Packing & Sealing Co., Ltd. All rights reserved.  浙ICP备10204943号-1 Powered by www.300.cn